Maintenance procedure of Generator Cooling System
How one maintenance Cooling system Drain?
Maintenance procedure of Drain:
Do not remove the pressure cap from a hot engine. Wait until the coolant temperature is below 50 degree Celsius = 120 F before removing the pressure cap. Heated coolant spray or steam can cause personal injury.
One must keep away from children and pets because Coolant is toxic. If one do not use it must disposal with according to government rules and regulations.
Drain the cooling system by opening the drain valve on the radiator and removing the plug in the bottom of the water inlet. A drain pan with a capacity of 5 gallon = 19 liter will be adequate in most applications.
Check for damage hoses and loose and damaged hose clamps. If need replace any parts must change and also check the radiator leaks, damage and build up of dirt.
Must cleaned and replace any parts if needed.